We definitely have a way to confirm whether your round bars on your 2012 Toyota FJ Cruiser work with the Yakima Kayak Carrier # Y04083-04082. As long as the round bars on your rack are at least 1-1/8 inches in diameter, the # Y04083-04082 can clamp onto those bars. I recommend measuring the diameter of your bars to make sure they fit into this thickness requirement. view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75461 is a great option for a 2010 Toyota FJ Cruiser and a confirmed fit. The install difficulty is rated as a 3 out of 10 so pretty easy overall. It will work great for towing or hitch mounted accessories like a bike rack. It does not require drilling.
I have attached an installation video below. view full answer...
Appreciate all that info, and you're off to a good start as you already have the first part needed for your 2008 Toyota FJ Cruiser to get a working 7-way, which is the 4-way T-One Vehicle Wiring Harness # 118405.
The other part you'll need to get a 7-way is the Universal Installation Kit for Trailer Brake Controller # ETBC7.
You'll plug your 4-way into the 7-way that comes with the # ETBC7, and the kit also includes the wiring, circuit breakers, and rest of the hardware needed for installation.... view full answer...
Yes, the SportRack Vista XL Cargo Box # SR7018 will fit your 2007 Toyota FJ Cruiser!
This roof rack is designed to fit round, square, aero, elliptical, most factory crossbars, and has a weight capacity of 100-lbs. view full answer...
The Thule Evo Raised Rail Feet # TH710401 will work with the Thule ProBar Evo Crossbars # TH713700. The issue you may run into is that the 79" ProBar Evo may overhang more than 8" past the Crossroad Feet. For the Thule Hullavator # TH898 to work, you'll need to have at least 4 inches of overhang past the foot and no more than 8 inches.
IF the 79" ProBar Evos do not give you the 4-8 inches of overhang were looking for, you'll need to get a smaller bar, which is where the next issue comes... view full answer...
It is not possible to run 17 inch wheels with the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/Flange - Off-Road Tires - 2.2K # ASR1THDS03.
The largest wheels you can run on a hub that fits the spindles on these Timbrens are 16 inches with the Dexter Trailer Hub and Drum Assembly # 84656UC3-EZ view full answer...
The Westin grille guard, # 40-2215, attaches to the bottom of the frame rails at the very end of each frame rail on your 2014 Toyota FJ Cruiser. If the winch mount attaches in the same place you would not be able to install both.
The other issue is the part of the mount those D-shackles mount to. The shackles could be removed but the mount still sticks out and is right where the upright supports of the Westin grille guard would be. view full answer...
If your trailer has 3,500 lb Lippert axles installed on it the Lippert lift kit part # LC270682 would work to give you the 3-1/2 inch lift you are wanting but if you have a different axle capacity/brand you'd have to let me know so I could see what you may need. I tried to see if I could find that info online and was not able to. view full answer...
The spare tire cover on your 2012 Toyota FJ Cruiser will need to be removed in order to use the Hollywood Racks SR1 2-Bike Carrier part # HRSR1. The reason for this is because the rack could shift as you go over bumps if it was not attached directly to the tire.
If you have the stock 265/70-17 tires on your FJ Cruiser then there won't be any fit issues with the bike rack. If you have an aftermarket tire size then so long as they do not exceed 15" wide then the bike rack will work just... view full answer...
I went out and measured an FJ in our lot, and it looks like your cross bars should be 2-5/8 inches wide.
The # 59504 roof rack will fit factory crossbars up to 3-1/4 inches wide, so it would be a great fit on your 2008 Toyota FJ Cruiser. view full answer...
You will need to do some measuring. Measure from the center of the hitch pin hole to the farthest back part of the spare tire on your Cruiser. This will give you the measurement you need to compare to the measurements of the rack. The etrailer Motorcycle Carrier for 2 inch Hitch, item # e98873, has 3 hitch-pin holes. This carrier has a measurement of the first hitch pin hole is 19-9/16" inches from the center of the hitch pin hole to the center of the wheel track and 7-5/16" inches to... view full answer...
The Yakima WindShield Fairing, part # Y05017, is designed to fit a variety of roof racks, including factory racks.
The 2012 Toyota FJ Cruiser OEM roof rack definitely has a unique system, but the front bar is all that matters for the WindShield. The front bar looks to be an aero-style bar, so the straps of the WindShield will work just fine. In fact, the installation video of this deflector features a roof rack with aero-style bars, so the installation will be the same. I've linked to... view full answer...
I spoke with my contact at Curt on whether or not the Front Mount Trailer Hitch Receiver, # 31367, can be installed on your 2008 Toyota FJ Cruiser with the grille guard in place. While he did not have any notes stated that it would not fit the Trail Team package models, he could not say for sure that it would fit.
I have included a link to the instructions below. Take a look at the mounting points for the hitch and then where the grille guard is mounted on your FJ Cruiser. If they use... view full answer...
The etrailer trailer hitch mount cargo carrier # e98874 measures approximately 9-1/2 inches from the top of the receiver tube to the top of the side rails nearest the vehicle at 19-1/2 inches back from the center of the pin hole. This can vary slightly though if the hitch receiver is angled slightly up or down. Based on this it would be very close on a 2013 FJ Cruiser but you would need to measure to be sure. Also, when folded up, the carrier is 9 inches from the center of the hitch pin... view full answer...
Yes, you can use Derale Oil Cooler kit # D15602 in your FJ Cruiser.
A supplementary oil cooler like the Derale # D15602 is a great way to keep your engine oil temperature in the ideal 180 to 200-degree Fahrenheit range. This Class III cooler kit includes a sandwich adapter and a range of sleeve nuts to ensure a proper match to the threads on your oil filter landing (where your oil filter currently mounts).
The best place to mount the cooler core is in front of your AC condenser where... view full answer...
The hole spacing on the Curt pintle mount # C48323 is 3-5/16 inches on center side to side and 1-3/4 inches on center up and down. Pintle hook/ball combo # C48200 or regular pintle hook # C48215 have the same mounting pattern so they will work. If you already have a Reese pintle hitch then it would just need to have the same mounting pattern. view full answer...
The Curt Multipurpose Ball Mount with 2 Inch Receiver # D210 will mount on to your 2007 Toyota FJ Cruiser as long as you have a hitch with a 2x2 inch opening.
However, it looks like there will be a clearance issue when trying to open the rear hatch door with the mounted spare tire. An employee here at etrailer.com has the same vehicle with a hitch. I measured the distance from the hitch to the spare and found that the if you used the Curt ball mount # D210 you will not be able to open... view full answer...
The Surco Folding Cargo Basket Adapter # 52015 is only verified to work with the Curt Railed Cargo Carrier # C18150.
Since your FJ Cruiser has a 2-inch Class III hitch you can choose a 2-inch folding carrier from the linked page. Curt folding carrier # C18151 offers 2-inches of rise in the shank.
You will want to measure from your hitch pin hole to the rear-most part of the FJ to determine which carriers will provide the clearance necessary to avoid interference with the spare tire.... view full answer...
You need only take one simple measurement of your FJ Cruiser's 2-inch hitch to know whether or not the Ultra-Fab Dirt Bike Carrier # UF48-979033 will clear your rear-mounted spare tire.
Measure from the center of the hitch pin hole to the rear-most edge of the spare tire. The minimum clearance you need will generally be one inch greater than the distance you measure.
This Ultra-Fab carrier provides 5-inches of clearance from the hitch pin hole so if your hitch-pin-hole-to-tire distance... view full answer...
The Yakima Single Speed # Y02481 will work great for your L Trek Farley fat bike.
This bike rack allows up to 5" wide tires and up to 29" tall wheels, so you will not have to worry about fitment issues.
The Yakima Single Speed comes with very long wheel straps in order to wrap around very wide tires on fat bikes.
I have attached a demonstration video for this bike rack. view full answer...
Go To Results